Soldering LED Lights

Here is a small update for the LED strip lights:

I've been trying to solder 4 wires running between the LED lights and the decoder. These wires are for the little conductive pads on the lights corresponding to RGB channels + power. However, after two tries and ruining 3 different conductive pads, I've realized that soldering is not a viable option for these lights.

The pads are too tiny to solder each wire individually without making a mess. And if I manage to solder properly, the cooled metal peels off from the light strip too easily, probably due to the shiny and slippery surface of the strip. For now, I decided to continue focusing on CRMX to get it to work and focus on adding the LED lights afterward.




Comments

Post a Comment

Popular posts from this blog

DMX in Unreal Engine

Image
Though I dived into Unreal DMX setup without confirming if my lights were properly connected, I eventually figured out how to get them to work through the engine! My main sources were the Unreal documentation and this specific  tutorial on Youtube. There are many tutorials that show cool DMX stuff that can be done in Unreal, but I've realized that only a limited few actually show how to pipe in the equipment into Unreal Engine or set up the network connections. Here are the steps I followed to get the lighting to work with Unreal: Creating a project and enabling plug-ins. I chose to create a DMX template project, which already came with all necessary plugins enabled. Changing project settings. I created a new "Output Port" and adjusted the settings based on the hardware and network I used. (The first 3 ports are the pre-existing ones from the project template.) - Net3 Gateway uses sACN protocol instead of Art-Net. - "Network Interface IP Address" is the main ...
Read more

Final Tests on CRMX

Image
Putting together everything I've researched and learned so far, created a mini set with DMX lighting on finals week. I've started by gathering all the equipment and setting up all the connections. After a few iterations, my final set included a camera, 5 Aputure lights (controlled via CRMX), and a big screen displaying the Unreal Engine scene for background. For my first test, I wanted to use a scene of a city with multiple, moving light sources. Looking through the Epic store, I found the free Soul City sample and decided to use it for its night scene. I've set up my scene in Unreal Engine and parented a Cine Camera and Scene Capture 2D camera to a locator. These cameras were facing the opposite way from each other. This way, the Cine Camera would render the scene behind the actor and put it on the display screen, while the Scene Capture 2D camera would calculate lighting information from the scene in front of the actor and send it to Pixel Mapping. To make the world move...
Read more

Pixel Mapping

Image
Here is one of the ideas that got stuck with me since the first week of class: taking the light information from a camera or a specific point in space in Unreal and doing some calculations to send the average color into a DMX light in the studio. While looking for information or ideas on how to achieve this, I've come across an Unreal feature called Pixel Mapping. And yes... this feature was exactly what I had been thinking of creating all this time, so turns out I don't have to reinvent the wheel! Here is the Unreal Pixel Mapping documentation with more detailed information. Since this feature didn't seem too complicated to set up, I wanted to give it a try and see how customizable it can be. This process simply has 3 main actors... 2D Scene Capture Camera: This camera is how the artist can decide which area in the scene will be captured in view and used for color averaging. Render Target: This actor takes the output from the camera and turns it into a texture. Pixel Mapp...
Read more